Two pre-factors for wooden covering of a wall in Tehran are on the table. Both introduce "wooden lamps" of similar length and width, but the amount of wood required and the final amount are significantly different. The problem often doesn't start with the price itself; It starts here that nominal width is not the same as the useful cover width, unspecified wood species or ordinary lamb and thermally modified wood are compared with the same name.
For the interior designer or wall and ceiling contractor, making the right choice means knowing where the wood will be installed, how much of each branch will actually cover the surface, and what specifications should be included in the order. This guide explains the selection criteria between wooden lamps and Termwood, from the quality of the profile to calculating the amount and checking the price.
Is a wooden lamp or Termwood more suitable for your project?
Lemba name is a connection form and profile; Thermowood is a wood that has undergone a thermal modification process. Therefore, the choice between the two is not always a choice between two competing products: a Thermowood board can also be produced with a bulb profile, i.e. male and female connection.
If the wall or ceiling of a dry interior space is to be covered, the wooden lamp with the appropriate species, humidity and finishing quality can meet the needs of the project. In the outdoor space or where the coating is exposed to changes in humidity and weather conditions, more stringent decisions must be made about the type of wood, the type of heat treatment, the substructure, the connection and the protective coating. For applications such as exterior with extended soaking, the International ThermoWood Association Guide introduces the Thermo-D category; This recommendation does not mean that there is no need for proper implementation or maintenance.
Another distinction is important in the inquiry: in the market, "Thermowood" is sometimes used generically for thermally treated wood, but ThermoWood is a registered trademark with a specific definition for the product and the manufacturer. If the seller claims to supply the product under this brand name, check the documentation related to its origin and specifications separately; The dark brown color alone does not prove such a claim.
So the more accurate question is not "is the bulb better or thermwood?"; The question is what wood with what process, what profile and what execution method is suitable for my installation place?
What things determine the quality and price of a wooden lamp?
A comparable price can only be obtained if the wood species, thickness, length, width of useful covering, quality of finish and delivery terms are the same in both offers. A number per branch or per meter of length, without these specifications, does not represent the actual cost of covering the surface.
What effect do wood species and humidity have on the performance results?
The type of wood affects the appearance, weight, texture and behavior of the piece during work and use; Humidity is also effective in changing its dimensions. The choice should be in harmony with the place of installation and the final finish, not just with the color of the sample that can be seen under the light of the store.
Wood exchanges moisture with the humidity of the environment. For this reason, proper drying, storage, and protection in transit are important: a piece stored in poor conditions may become deformed after installation, or gaps may fall between the boards. The American Forest Products Laboratory explains that controlling wood moisture during drying, storage, and manufacturing is a way to reduce unwanted dimensional changes.
To evaluate an order, ask for the species name in writing and check several branches from the same shipment for warping, end cracks, problem knots, and uniformity of finish. If the project is of a large scale, it is not enough to review only a good-looking sample; It should be clear that the delivered product matches the accepted sample in terms of profile and appearance.
How to measure profile, useful dimensions and machining quality?
The width listed on the product is not necessarily the same width that can be seen on the wall after the male and female are engaged. To measure and compare the price, ask the seller for the useful cover width and try the actual multi-prong connection.
The groove and tongue must fit together without abnormal pressure; A too tight joint can damage the edges during installation, and an irregular joint will make the shadow line of the wall uneven. Check the thickness at several points. A noticeable difference in the thickness or depth of the profile, even when a single number is written on the specification sheet, shows itself in the execution of the continuous surface.
To clarify the effect of useful width, suppose a board is 3 meters long, 12 cm nominal width and 10 cm useful covering width. Each branch covers about 0.30m2 after installation, not 0.36m2. Therefore, for a hypothetical surface with an area of 50 square meters, about 167 branches are needed before calculating the projection and cutting; The calculation with the nominal width erroneously shows about 139 branches. This example is not a specification of a product on the market; It shows why a fixed number in the pre-invoice can change the purchase plan.
Comparison criteria | Ordinary wooden bulb | Lamp or profile made of thermally modified wood |
Verifiable application | Interior wall and ceiling, according to the type and conditions of the space | Interior or exterior space, depending on the product category and implementation details |
Sensitivity to change Moisture | as a function of species, drying and storage conditions | Thermal modification usually reduces the dimensional change caused by moisture |
Surface appearance | Depending on the type, knot, texture and finish | In addition to the type and finish, the heat process affects the color |
Important point when ordering | Moisture, uniformity Useful profile and width | Process documentation, proper application, connections and protective coating |
Basis of cost comparison | Cost per useful coating area and delivered quality | Same premise, plus implementation and maintenance requirements |
I, Shahbazi, when checking the order of Lampe and Termwood in Azarwood, I first ask the place of installation and the width of the useful cover; Then I will go to the price. Experience has taught me that if the order is reversed, the cheapest offer on paper may not be the right choice after the meter and execution.
The first costly error is comparing two prefactors with different units. One offer may announce the price of each branch and the other the price of each square meter; Even if they both talk about "12" wide, it's not a fair comparison unless the useful width, branch length and number of healthy branches in the package is clear. I prefer to return both offers at the cost of covering one square meter, with the same specifications and known delivery conditions.
The second mistake is ignoring the installation direction and location of the cuts. In a small wall, the existing lengths may be used well, but a wall with multiple breaks or a design where the connection line should not be seen requires a different estimate. Ordering the amount of wood without a layout plan sometimes leads to the lack of a few branches of the same color at the end of the work or the accumulation of unusable short pieces.
The third mistake is judging about Termwood only by the darkness of the color. What is important for the facade is the specifications of the product itself and its compatibility with the application. In the same way, it should not be assumed that thermally modified wood will retain its original color without treatment if it is exposed to the sun; ThermoWood's guide states that UV radiation can gray the surface without a protective coating and recommends a suitable coating for the product exposed to weather conditions.
Finally, I advise the carpenter colleagues to finalize the details of the end of the board and the type of connection before buying. If the joint directs water into the cut or the wrong fastener is used, wood selection alone will not solve the problem. ThermoWood's technical guide emphasizes protecting cut ends and using a corrosion-resistant fastener.
What is the roadmap for ordering and implementing Lembe and Termwood?
A detailed order starts with the definition of the installation location and is completed by confirming the sample, meters based on the useful width and recording the shipment specifications. This path helps the designer and the executive to talk about a specific product before payment, not just a general title on the invoice.
- Write the application carefully. Interior dry wall, ceiling, semi-open space and exterior do not have the same requirements. Determine if the surface is exposed to rain, sun, steam, or significant fluctuations in humidity. For outdoor use, check the compatibility of the product category with the placement conditions in the specification.
- Get measurable specifications. Record the wood species, product type, thickness, length, nominal width, useful cover width, profile shape, type of finish and price unit in a sheet. If the title ThermoWood or a specific category such as Thermo-D is involved, ask for documentation of the same claim.
- Measure with an actual sample. Place one or more branches together and measure the width of the resulting cover. Then divide the required area by the useful coverage area of each branch. Estimate the cutting edge separately and according to the map, installation direction, available lengths and connection locations; A fixed percentage is not accurate for all projects.
- Consider the final cost. When checking the wooden lamp price, don't forget the cost of substructure, fasteners, surface coating, transportation to the project site and the possibility of replacing the damaged branch. For wholesale sale of thermo wood, also specify which type, category, profile, order volume and delivery conditions the announced price is. Without this data, it would be misleading to provide a single "price of the day".
- Confirm the sample and delivery terms. Before finalizing the direct log purchase, clarify the appearance and dimensional acceptance criteria, packaging method and delivery time. For a product that is going to be installed indoors, it is important to keep it dry and suitable before implementation; Regarding the preparation time and method, also refer to the instructions of the same manufacturer, not a fixed recommendation for all woods.
In Azarwood, the starting point of the conversation about the production and sale of Lampe and Termwood can be this specification sheet: dimensions and place of implementation by the designer or executive, then checking the profile and the required quantity on the same basis. This does not take the place of an executive visit or final sample approval, but it turns ambiguous questions into verifiable decisions.
Conclusion and final opinion
To choose wood, first determine the use and measurable characteristics, and then put the prices together. A suitable lamp with a precise profile and correct meter will be a safer choice than an offer that only has a more familiar name but vague specifications.
I, Shahbazi, believe that a good decision in a wood project starts with a simple question: "What surface exactly will this branch cover under what conditions?" If you are hesitating between several types of lamps or thermowood for a project in Tehran, prepare the dimensions of the surface, the installation location and the desired shape of the profile and discuss about technical specifications and meter method; The answers to these questions show the way more accurately than any price comparison.
جهت ثبت سفارش تماس بگیرید


